How You Can Update Firmware for the DJI Phantom 3 Expert and also Advanced

DJI Phantom 3 Advanced
DJI Phantom 3 Advanced With Camera

The DJI Phantom 3 Advanced is the standard model of the 2015 Phantom 3 drone series. The P3 Criterion is $500+ as well as does not have much of the new attributes such as 4k resolution, lightbridge signal variety, sensing units, GLONASS GPS, etc, so we VERY suggest upgrading to the new DJI Mavic Pro which begins at $749.

Firmware updates could take care of bugs or include brand-new functions to your Phantom 3 drone. That’s why it’s important to keep your drone’s firmware as much as day. To help you along, we’ve included this step-by-step overview for your Phantom 3 firmware update. We’ve additionally added straight data connect to each firmware upgrade.

There are two applications to download and install: DJI Go on mobile and DJI Aide on desktop/laptop. Download And Install DJI Aide 2 prior to you access the most recent firmware.

Before you begin, ensure:

Your variations of DJI Go as well as Assistant 2 are up-to-date
You have a DJI account
Your mobile phone as well as computer have Net accessibility
Your DJI Phantom 4 is fully charged, as updates take about 15 min.

The best ways to Update:

Adhere to these guidelines very carefully. Do not avoid any steps and review all directions before starting update:

Step 1: Most likely to http://www.dji.com/product/phantom-3/download as well as download the firmware upgrade that corresponds to your airplane design (Expert or Advanced).

Step 2: The download will save to your computer as a zip documents, open the documents and also you must see the complying with or really similar:.

Step 3: Remove the SD card from the gimbal of the airplane as well as insert right into your computer system using its SD port or by using an USB card reader. Return to download and install’s zip folder as well as extract ONLY the.bin documents (you could additionally right click the.bin and copy as well as past the file next to the DCIM folder of your SD card – it is essential that only the.bin be put on the card, if the text documents is also existing your upgrade will certainly not upload to the airplane properly).

Step 4: Ensure your aircraft is off. Remove SD card from your computer or USB reader as well as slide it back right into gimbal. It will click in place. Guarantee your aircraft’s battery goes to the very least 50% and after that activate aircraft with SD card currently inside. (Remote controller needs to continued to be powered off throughout this process and also gimbal clamp need to be eliminated from aircraft).

– The firmware update begin immediately as well as take around 25 mins to finish. While the aircraft is updating, the standing indication light simply above the cam will certainly flash from eco-friendly to red and also the drone will certainly beep “D-D-D-D.” Once the light is strong eco-friendly as well as the beeping adjustments to “D-DD,” the process is complete and the aircraft can be shut off.

Spep 5: After the condition indication light shows solid environment-friendly and also your airplane has been turned off, eliminate the SD card and also once more place it right into your computer system or USB viewers. Open up the SD card’s folder to show the.bin as well as a.txt file with the firmware upgrade’s results. Open the message file as well as verify “success” condition for the upgrade. It needs to show up similar to below( if condition is “failed” delete.txt file as well as attempt firmware upgrade once again):.

VITAL: Delete both the.txt data and.bin data after firmware upgrade is verified. If left on the SD card when inserted back into the drone, aircraft will certainly not work effectively.

Upgrading Remote Controller Firmware.

Prior to starting upgrade, make sure your DJI GO application is up to day, your mobile device or tablet has web access as well as remote controller contends least 50% battery level.

Step 1: Turn on remote controller as well as plug in the tablet computer or mobile device with the DJI GO application on it. When plugged into the remote controller, launch DJI GO app if it has not turn up after connecting in.

Step 2: Go Into Electronic Camera View and afterwards Touch the System Condition bar on top facility of the application. The update timely will certainly appear under Total Status, touch the update and download the firmware bundle.

Step 3: When Download and install has completed, faucet Begin to Update in app. LED light on remote will blink blue during upgrade, then turn strong environment-friendly when total.

Step 4: Once the upgrade is total, transform remote on and off. You’re currently prepared to fly!
There you have it: Just how to mount your Phantom 3 firmware upgrade! It is very important to recognize exactly how important Phantom 3 firmware is to you and your Phantom 3 quadcopter. Each upgrade can settle crucial issues. An update can also function as a DJI Phantom 3 Advanced, producing brand-new features and enhancing old, including download as well as streaming rates. Updates have also boosted the Phantom 3 cam high quality as well as Phantom 3 antenna action, among other things.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s